YardHatchMy Yard
Resources · resource

Paver Patio Material Checklist

A practical reference for paver patio material checklist and supplier conversations.

Use this reference

Estimate each part of the paver system separately.

  • Pavers: measured surface ÷ piece coverage, plus cut allowance.
  • Aggregate base: compacted area and design depth, then loose order conversion.
  • Bedding material: area and specified installed depth.
  • Edge restraint: exposed perimeter length and compatible anchors.
  • Joint material: manufacturer coverage based on joint width and depth.
  • Drainage and access: site-specific materials, excavation, and disposal.

Get the project specification from the paver manufacturer or qualified designer before ordering structural layers.

Paver system layersPavers, bedding, compacted base, and prepared subgrade are separate layers. Depths depend on the approved design.paversbedding materialcompacted baseprepared subgrade
Pavers, bedding, compacted base, and prepared subgrade are separate layers. Depths depend on the approved design.
Measuring an irregular yard with tape, stakes and paper sketch
Illustrative process view

Reference

Concrete Masonry & Hardscapes Association: Paver technical guidance. Supplier labels and local guidance control the final purchase.