YardHatchMy Yard
Hardscape · project

How To Build A Paver Walkway

Measure, price, and prepare the materials for build a paver walkway.

Paver walkway joining a gate and garden, believable geometry
Illustrative project example

Plan path width, transitions, and drainage around adjacent surfaces.

Measure the project

Measure walkway area and exposed edges; account for borders and cuts.

Estimate the main material
Paver system layersPavers, bedding, compacted base, and prepared subgrade are separate layers. Depths depend on the approved design.paversbedding materialcompacted baseprepared subgrade
Pavers, bedding, compacted base, and prepared subgrade are separate layers. Depths depend on the approved design.

Material checklist

  • Pavers
  • Base aggregate
  • Bedding material
  • Edge restraint
  • Joint sand

Check quantities, specifications, and delivery with your supplier. This list is a planning prompt, not a construction design.

Quantities to price

  • Paver count: surface area ÷ piece coverage, plus border and cut allowance.
  • Base and bedding: estimate as separate layers at specified depths.
  • Edge restraint: measure both exposed sides and ends.
Where the plan can change: Confirm transitions to steps, gates, and existing pavement before setting finished height.

Work sequence

  1. Mark alignment
  2. Prepare subgrade
  3. Build base and bedding
  4. Lay and restrain pavers

Further guidance

Concrete Masonry & Hardscapes Association: Paver technical guidance. Follow local requirements and product instructions for the actual installation.