Hardscape · tool

Paver Calculator

Estimate paver quantities with editable measurements and clear units.

How many pavers do I need?

Divide paved area by coverage per paver, apply the cutting allowance and round up to whole pieces. For 100 sq ft with 1 sq ft pavers and a 10% allowance, the result is 110 pavers. Supplier packs, pattern kits and joint dimensions may change the final order.

Illustrative arithmetic, not a site or product specification. Use the inputs below to calculate your own estimate.

Calculate your quantity

Use your measured area and the actual product specification. The result updates as you change an input.

Concrete patio pavers arranged in a plausible simple pattern
Illustrative material view

How this estimate works

Paver count = square feet × (1 + cutting allowance ÷ 100) ÷ individual paver coverage, rounded up.

Count pavers and include cutsDivide paved area by coverage per piece, then apply a separate cutting allowance.area÷ piece+ cuts
Divide paved area by coverage per piece, then apply a separate cutting allowance.

A paver project includes distinct base, bedding, surface, edge, and joint materials. Installed compacted depth and loose delivered volume are different values.

Before you order

  • Use a base specification suited to traffic, soil, and climate.
  • Ask for product coverage and the loose-to-compacted factor.
  • Measure exposed edges and account for pattern cuts.

Planning estimates can differ from delivered or installed quantities.

Reference

Concrete Masonry & Hardscapes Association: Paver technical guidance. Product specific rates and installation specifications take precedence over general defaults.

Before you buy