Lawn · tool

Sod Calculator

Estimate sod quantities with editable measurements and clear units.

How many sod rolls should I order?

Multiply measured lawn area by one plus the cutting allowance, then divide by the supplier’s roll coverage and round up. For 600 sq ft, an assumed 5% allowance and 10 sq ft rolls give 630 sq ft or 63 rolls. Confirm pallet rules, actual roll coverage and cuts before ordering.

Illustrative arithmetic, not a site or product specification. Use the inputs below to calculate your own estimate.

Calculate your quantity

Use your measured area and the actual product specification. The result updates as you change an input.

Fresh sod rolls with visible turf and soil profile
Illustrative material view

How this estimate works

Order area = measured square feet × (1 + cutting allowance ÷ 100); rolls = order area ÷ supplier roll coverage, rounded up.

Seed, sod, and fertilizer use different rates and buying units. Use the grass species, bag label, supplier coverage, and soil test appropriate to the site.

Before you order

  • Measure the area to treat, not the whole property.
  • Check the seed or fertilizer label and local guidance.
  • Include preparation and establishment care in the project plan.

Planning estimates can differ from delivered or installed quantities.

Reference

Penn State Extension: Lawn establishment. Product specific rates and installation specifications take precedence over general defaults.

Before you buy